TRAINING

1. Shampoo the hair using MYT shampoo. 
2. Take Lue, the intense repairing hair mask, in a bowl. 
3. Take one syringe of Keramides, crush them into Lue mask, and mix well. 
4. Apply the mixture gently and evenly along the length of the hair, then emulsify thoroughly to ensure even distribution. 
5. Leave It on for 15 minutes. 
6. Rinse thoroughly with water. 
7. Apply Kimono serum. 
8. Dry hair using a dryer on normal heat setting. 

1. Shampoo the hair using Nectru shampoo. 
2. Take Grove, the intense repairing hair mask, in a bowl. 
3. Apply the mixture gently and evenly along the length of the hair, then emulsify thoroughly to ensure even distribution. 
4. Leave it on for 15 minutes. 
5. Rinse thoroughly with water. 
6. Apply Kimono serum. 
7. Dry hair using a dryer on normal heat setting. 

1. Take Cheri and Pour. 
2. Mix 20 gms of Cheri with 4 drops of Pour. 
3. Apply the mixture to the scalp in thick sections. 
4. Massage the scalp for 10-12 minutes using light circular motions. 
5. Add small amounts of water to the scalp to emulsify the mixture.
6. Wash the hair with the Scalp Balancing Shampoo (Aira for oily scalp & Alvo for normal scalp). 
7. Apply Viv Mask from scalp to ends.
8. Massage and leave it on for 10-12 minutes. 
9. Rinse thoroughly with water. 
10. Apply Kimono Serum, and dry as desired.

1. Shampoo the hair, according to the hair and scalp condition.

2. Mix Fezu One with water, in the ratio 1:6.

3. Apply the mixture onto the hair.

4. Leave it on for 10 minutes. 

5. Apply Fezu Two, section by section.

6. Leave it on for 20 minutes. 

7. Rinse with water. 

8. Apply Kimono serum. 

9. Dry hair using a dryer on normal heat setting.

1. Wash hair with any deep cleansing shampoo
2. Apply Bond Plex evenly (Use 2 pumps (2 press) for up to shoulder, 4 pumps for below shoulder and 6 pumps for up to waist.)
3. Leave for 15 minutes
4. Without rinsing, apply Hydrarevive Mask on top of the Bond Plex
5. Leave for another 15 minutes
6. Rinse thoroughly
7. Apply Ultimate Revitalize Conditioner for 2–3 minutes
8. Rinse well
9. Finish with Hydrify Gloss Mist as heat protection & shine booster

Colouring, Pre-Lightening & Neutralizer Mixing Guide 

• For 30g colour → add 2 pumps 
• For 60g colour → add 4 pumps 
• For 90g colour → add 6 pumps

Use during pre-lightening/colour process for better protection & balanced results

Step 1: Hair Preparation (Optional Pre-Treatment)

* Apply the Molecular Pre-Treatment spray on damp hair (lengths & ends).

* Work through sections for 1–2 minutes.

* Do not rinse (layering technique).  

👉 This step deeply injects peptides + amino acids to start repairing internal damage.

⸻

Step 2: Cleansing (Shampoo)

* Apply Absolut Repair Molecular Shampoo directly over the pre-treatment or on wet hair.

* Massage gently and rinse thoroughly.  

👉 Cleanses while beginning molecular repair.

⸻

Step 3: Rinse-Off Serum (Core Repair Step)

* Apply Rinse-Off Serum on wet hair (mid-lengths to ends).

* Use 2–3 pumps per section.

* Work into hair for 1–2 minutes, then rinse.  

👉 This is the main rebuilding step—it re-injects peptide bonds into the hair fiber.

⸻

Step 4: Molecular Repair Mask

* Apply the Repair Mask evenly on damp hair.

* Leave for 3–5 minutes.

* Rinse thoroughly.  

👉 Adds strength, smoothness, and deep nourishment.

⸻

Step 5: Leave-In Mask (Final Sealing Step)

* Apply Leave-In Mask on towel-dried hair.

* Do not rinse.

* Proceed with blow-dry or styling.

Step 1

Wash hair with MK Clarifying Shampoo (1–2 times)

* No conditioner

* Ensures cuticles are open for absorption

Step 2

Towel dry the hair.

Step 3

Mixing of Express Botox treatment.

Mixing ratio 1:3

Examples: 

For 5ml Express Botox ,15 ml of Lukewarm water

For 10ml Express Botox, 30 ml of Lukewarm water

For 15ml Express Botox, 45 ml of Lukewarm water

Step 4

Application of Express Botox, emulsify properly.

After application cover with cling wrap or shower cap.

Wait for 20 minutes

Step 5

Rinse 70 percent with water only

Step 6

Blow-dry 100% using brush

Step 7

Heat Sealing.

* Flat iron at 180–200°C (350–400°F)

* 5–10 passes per section

Seals nutrients into cuticle for longer-lasting results

1. Diagnosis (Very important – don’t skip)

Check:

Dryness level.

Porosity.

Chemical history (color, bleach, keratin).

Decide quantity of product + processing time.

👉 This step helps you customize and avoid overloading fine hair.

⸻

2. Pre-Nutrition (Oil/Wax Booster Step)

Apply Nutri Glow booster (oil/wax) on dry hair

Focus on:

Mid-lengths.

Ends (most damaged area).

Leave for 5–10 minutes.

👉 Purpose:

Replenishes lost lipids.

Prepares hair to absorb treatment better.

⸻

3. Gentle Cleansing

Wash with Nutri Glow sulfate-free shampoo.

Do 1–2 washes depending on oiliness.

Towel dry (leave hair slightly damp).

👉 Don’t over-wash—this treatment works with oils, not against them.

⸻

4. Deep Nourishment Mask Application

Section hair into 4 parts.

Apply Nutri Glow mask evenly.

Comb through for proper distribution.

Processing Time:

Fine hair: 5–10 mins.

Medium: 10–15 mins.

Thick/damaged: up to 20 mins.

👉 You can use steam or mild heat for better penetration (optional but premium touch)

⸻

5. Rinse (Important technique)

Light rinse (70–80%).

Do NOT completely strip the product.

👉 Leaving a slight residue helps in the lamination effect

⸻

6. Sealing / Lamination Step

Apply leave-in / sealing fluid.

Blow dry with tension (smooth finish).

👉 Optional:

Light ironing (very low heat, 160–180°C) if extra sleekness is needed. Not mandatory like keratin.

⸻

7. Final Finish

Apply serum or finishing oil.

Style (blowout / soft waves).

👉 This is where the “mirror shine” reveal happens

⸻

⏱️ Total Service Time

30–45 minutes

    👉 Perfect express premium service between major appointments

⸻

⚠️ Common Mistakes (Avoid These)

❌ Over-rinsing → reduces shine effect

❌ Applying too much product → greasy finish

❌ Skipping blow-dry → no lamination effect

❌ Treating it like keratin → unnecessary ironing

⸻

💡 Pro Tips (For Better Results + Upselling)

Add steam therapy → charge extra ₹300–₹500

Recommend sulfate-free home care → improves longevity

Position as:

“Gloss booster after color”

“Monthly hair facial”

Step 1: Deep Cleansing

* Wash hair with clarifying or repair shampoo

* Removes buildup and opens cuticle

👉 Prepares hair for maximum absorption

⸻

Step 2: Towel Dry

* Towel dry to damp condition (60–70%)

* Avoid dripping wet hair

⸻

Step 3: Hair Filler Application (Core Step)

* Section hair properly

* Apply Hair Filler Mask from roots to ends

* Comb through evenly

👉 The formula:

* Penetrates deep into hair fiber

* Fills internal gaps and damage

* Rebuilds structure using collagen & lipids  

⸻

Step 4: Processing with Heat

* Leave for 20–30 minutes

* Use:

    * Steam

    * Heat cap

    * Climax/hood dryer

👉 Heat helps deeper penetration of active ingredients

⸻

Step 5: Rinse

* Rinse thoroughly with water

* No shampoo

⸻

Step 6: Blow Dry

* Blow-dry hair completely

⸻

Step 7: Heat Sealing (Optional)

* Light ironing (180–200°C) if required

👉 Enhances smoothness & locks treatment

Step 1: Gentle Cleansing

* Wash hair using sulfate-free curl shampoo

* Removes buildup without stripping natural moisture

👉 Clean, hydrated base is key for curl formation  

⸻

Step 2: Conditioning & Detangling

* Apply curl-friendly conditioner

* Detangle using fingers or wide-tooth comb

👉 Adds slip, softness, and prepares curls for styling

⸻

Step 3: Leave Hair Damp

* Do not fully dry

* Keep hair damp (not dripping)

👉 Curl products work best on damp hair for even distribution  

⸻

Step 4: Apply Curl Definition Product

* Use curl cream / leave-in moisturiser (cream + gel hybrid)

* Apply section by section (mid-lengths to ends)

* Use techniques like:

    * Raking (finger combing)

    * Praying hands method

👉 These products:

* Hydrate curls

* Provide light hold

* Control frizz  

⸻

Step 5: Scrunching / Curl Activation

* Scrunch hair upwards to activate natural curl pattern

* Optional: finger coiling for better definition

👉 This is the key step that shapes curls

⸻

Step 6: Drying (Air Dry / Diffuser)

* Air dry OR

* Use diffuser on low heat & low speed

👉 Avoid touching hair while drying to prevent frizz  

⸻

Step 7: Finishing

* Light serum or oil (optional)

* Break any stiffness (if present) by gentle scrunch

Step 1: Consultation & Hair Analysis

• Identify curl type (wavy / curly / coily)

• Check:

• Dryness level

• Frizz / porosity

• Damage (chemical / heat)

• Decide:

• Moisturizing shampoo vs Anti-build-up shampoo

Step 2: Cleansing (Shampoo)

• Apply Curl Expression Moisturizing or Anti-build-up Shampoo

• Massage gently into scalp and lengths

• Rinse thoroughly

👉 Purpose:

• Removes dirt, product buildup & hard water residues

• Prepares hair to absorb treatment  

Step 3: Deep Treatment (Mask)

• Towel-dry hair (70–80% dry)

• Apply Curl Expression Intensive Moisturizing Mask

• Distribute evenly using fingers or wide-tooth comb

• Leave for 10–15 minutes

• Optional: Steam for better penetration

• Rinse thoroughly

👉 Purpose:

• Deep hydration + detangling

• Restores softness, elasticity & shine  

Step 4: Leave-in Moisturisation

• Apply Leave-in Curl Cream / Long-lasting Moisturizer

• Focus on mid-lengths & ends

👉 Purpose:

• Locks in moisture

• Controls frizz & improves manageability  

Step 5: Curl Definition Styling

• Apply:

• 10-in-1 Cream-in-Mousse OR

• Curl Activator Jelly

• Use scrunch technique or finger coiling

👉 Purpose:

• Enhances curl pattern

• Adds definition without crunch  

Step 6: Drying

• Option 1: Air dry

• Option 2: Diffuser drying (recommended for salons)

• Use Drying Accelerator Spray (optional)

👉 Purpose:

• Faster drying

• Reduces frizz and protects from heat  

Step 7: Finishing & Revive

• Apply Curl Reviver Spray

• Light scrunch for bounce

👉 Purpose:

• Adds shine & refreshes curls

• Enhances long-lasting definition  

Final Result

• Deeply hydrated curls

• Defined, bouncy texture

• Frizz control up to 48 hours

• Lightweight, natural movement  

Pro Tips

• Always detangle during mask stage, not after styling

• Never over-apply mousse (causes stiffness)

• Use micro-sectioning for premium curl definition services

• Recommend homecare routine (shampoo + mask + reviver)

Step 1: Scalp Analysis

* Examine scalp condition (dry or oily dandruff)

* Check for flakes, irritation, redness

* Decide treatment intensity and product quantity

Step 2: Sectioning

* Comb and divide hair into neat sections

* Ensure scalp is clearly visible for application

Step 3: Pre-Treatment Application

* Apply Biolage Anti-Dandruff concentrate directly onto scalp using nozzle or brush

* Focus on affected areas

* Gently massage for 5–10 minutes to loosen flakes and activate product

Step 4: Processing Time

* Leave product on scalp for 10–15 minutes

* Optional: Use mild steam for better penetration

Step 5: Cleansing

* Rinse thoroughly

* Shampoo with Biolage Anti-Dandruff Shampoo

* Massage well to remove flakes and buildup

* Repeat if necessary

Step 6: Conditioning / Mask

* Apply conditioner or scalp mask on mid-lengths and ends

* Avoid heavy application on scalp (especially for oily dandruff)

* Leave for 5 minutes and rinse

Step 7: Post-Treatment Care

* Apply leave-in scalp tonic or serum

* Lightly massage for absorption

Step 8: Drying & Finish

* Blow dry or air dry completely

* Do not apply oil immediately after treatment

Service Duration: 45–60 minutes

Recommended Frequency

* Once every 15/30 days (initial phase)

* Maintenance as required

Home Care Advice

* Use anti-dandruff shampoo 2–3 times per week

* Avoid excessive oiling if dandruff is oily/fungal

* Maintain scalp hygiene

Shampoo the hair using anti dandruff shampoo. 

Apply gel cleanser (No.1) on scalp by doing section by section of the scalp. Emulsify it all over the scalp for 7-10 minutes or massage it for 7-10 minutes. Then rinse it off with normal water & towel dry the hair.

Apply Hydrating masque (No.2) by doing section by section of the scalp.
Give massage for 7-10 minutes. Rinse it off with normal water & towel dry the hair.

Apply hair masqe on entire length of hair and wash out after 5-10 minutes. 

Blow dry the hair. 

Apply anti dandruff tonic only on the scalp. Emulsify until it totally gets absorbed on the scalp & leave it on.

Advise customer to buy and use the retail products twice a week for better results. Total cost of cleanser, masque and tonic is only 1190/-

1. Consultation

Check for allergies, cuts, sunburn, or sensitive skin.

Explain the procedure to the client.

2. Cleansing

Wipe or cleanse the body area with a warm towel to remove oil and dirt.

3. Body Scrub (Exfoliation) – 15 to 20 mins

Apply Berry’s Body Scrub evenly on the body.

Massage in circular upward motions.

Focus on elbows, knees, back, and dry areas.

Remove the scrub with warm towels or shower.

4. Body Mask – 15 mins

Apply a thin even layer of Berry’s Body Mask.

Leave it on for 10–15 minutes.

You may wrap the body lightly with a sheet or plastic wrap for better absorption if needed.

Remove using warm towels or shower.

5. Body Wrap – 15 to 20 mins

Apply Berry’s Body Wrap cream evenly.

Wrap the body with plastic film or thermal blanket.

Allow the client to relax for 15–20 minutes.

Remove the wrap and wipe excess product.

6. Body Cream / Moisturiser – 10 mins

Apply Berry’s Body Cream generously.

Finish with a relaxing full-body massage using long smooth strokes.